PT 11 owners and builders may find these updates valuable. We have made PDF's for easy download and in color!

While we are much happier with the new gasket installation method, the hull gasket is still vulnerable to being yanked out of its notch at the lower corners. Why is this? Because surgical tubing is difficult to adhere to and its also very “grabby”, meaning, hard friction when assembling the boat or otherwise, can pull the gasket out of its notch.  Flushing with fresh water and re gluing is quite easy but we’d really like to test using neoprene for the hull gasket. Neoprene doesn’t have perfect memory but we think it would work fine for the hull gasket; it’s not grabby and it glues well.
For anyone who wants to try the neoprene hull gasket, we will send you 5ft of the stuff in exchange for a full report of its performance. New method for installing or replacing gaskets. PDF ptwatercraft.com

The surgical tubing is still our preference for the hatch and dagger board trunk gaskets.ptwatercraft.com

Installing a handle and bailer for the aft section of the PT 11. PDFptwatercraft.com

Finishing details from Page 290 in the new manual starting with the foot braces section.PDF

The above PDF includes the previous two 'PDF's along with other details from the end portion of the new manual starting at the foot braces section.

Another update we recently posted concerns a tight fit on some dagger boards due to over thick trunk log plywood.  If your dagger board is too tight, see the fix HERE.

😉 AEB