The PT 11 sailing rig is one of our creations that we are quite proud of. The carbon tubes are engineered specifically for this rig and manufactured in Washington at Innovative Composites Engineering. It is fun for us to imagine our tubes along side Space-X & NASA tubes, and among top name windsurfer and paddle boarding tubes. Mostly we are proud that this quick-to-set-up rig, with sail and all hardware & rigging, weighs a scant 10.5 LBS.

Our boom attaches to the mast with a custom gooseneck. For years we have made these goosenecks out of vacuum bagged carbon & epoxy in a multi step process that included a lot of carbon dust, finishing, tapping, assembling, and hand stitching tubular webbing onto the forks for a soft contact point on the mast. After hundreds of these, there just had to be a  better way.

In 2021, as we sought to offset increasing costs in general and reduce labor where we could, one of the things we did was redesign our gooseneck. After years of trying to think of a better way, Russell began sketching out a new design based on using 1/2" Delrin plate and CNC router technology.

The resulting gooseneck is clean, practical, stronger, and most importantly, much less labor to finish and install. The new goosenecks are installed by pouring epoxy around them. A tight fitting foam plug traps the epoxy. Speaking of tight fitting foam plugs; there are 7 plugs in the 3 tubes that these rigs are made from, 5 of them custom made of different sizes from dense rigid foam. Why? To keep them from filling with water and sinking of course. Why do we need 7 plugs to plug both ends of 3 tubes? The seventh plug is a secret. 😉

PT 11 sailing rigs are still produced by Russell and drop-shipped from Port Townsend. They can be purchased through Chesapeake Light Craft. Customers who purchased their PT 11 kits from PT Watercraft pre-2021 should contact us directly regarding PT 11 options. We have experienced periodic delays so lead times vary.

Happy Sailing! ...AEB 😉