Pacific NW Boat Owners:

The Port of Port Townsend is under new management and is eager to welcome leisure and work boats alike. The port has recently been collaborating with the Marine Trades Association and community members to adjust prices and attitude to better represent our beloved working waterfront culture. Port Townsend is unique with its concentration of amazing skills, services, and integrity, supporting that culture.

Please contact the PortofPT.com for quotes and/or PTMTA.org for services directory and additional information.

Now promoting a SHIPYARD Winter DISCOUNT, as well as the general boat yard Winter discounts. At the Commission Meeting of September 26, 2018, new seasonal (300ton lift) Shipyard Storage Rates for a 30% discount were approved. *

The boat yard is already using Winter rates for the 75 ton lift with a minimum of 60 days.** This fee schedule compares with regional yards that offer similar services. In my humble opinion, however; there simply is not a boat yard anywhere that offers as much in excellent services and great atmosphere. Just sayin'.

AEB 😉

*SHIPYARD RATES: (This is for Storage Rates only:for boats hauling out on the 300 ton travel lift. Current daily rate is $1.15 ft/day.   Current monthly rate (20% discount)  is $0.92 ft/day. New Seasonal 300 Ton Shipyard Storage Monthly Rate (30% discount) is $0.80 ft/day, with one month prepayment, October 1- March 31.)

**70-75Ton lift yard rates..

ptwatercraft.com
Port Townsend is one of the most highly respected working waterfronts on the west coast.

 

The PT 11 and Spear are very dependent on gaskets. The 11 has a hull gasket, a hatch gasket, and a trunk cap gasket. The Spear has two hatch gaskets and a trunk cap gasket. ptwatercraft.com
We are fairly proud of the gasket systems we have developed, but nothing is ever perfect. The latex tubing gaskets set in notches of the correct depth work amazingly well, but we have had some trouble with two things:

One of the issues is that gluing the latex gaskets is difficult, so they can come loose.
We have tried just about every adhesive and have finally found one that works much better than the contact cement method described in the manual. More about that in a soon-to-come blog post.
The other thing we have recently had happen is the outer face of the gaskets becoming stuck to their mating surfaces. This seems to be a problem mostly with the trunk cap, where the gasket is pressed much more firmly, due to the gasket notch depth being limited. We tried coating the outer face of the gasket with a few different lubricants, Vaseline being the one that seemed to work.
We will do a blog post about gluing in new gaskets with the adhesive we have found to work, but first we would like feedback on gasket issues from our customers. -What issues have you had?

-Do you need a new set of gaskets for you boat?

-If your gaskets are working fine, consider rubbing a light coat of Vaseline (or maybe you know of something that will work better) on the outer face of the gaskets, especially if your boat is being left assembled for long periods of time.

Thank you!

RB

For some reason I have yet to fathom, I am still catching up from the Race to Alaska, Shark Spit Regatta and our Port Townsend Wooden Boat Festival.

This year's Wooden Boat Festival was once again a whirlwind of new and familiar faces, interesting conversations, and wonderful boats. It ended a few hours early as one of our rather famous southerlies kicked up around mid day on Sunday. The bigger boats headed out into the bay to keep space around themselves. The smaller boats hunkered down in the marina. The "sailby" was wisely cancelled. Tents were buffeted, the dust was whirling but the classrooms and restaurants were full and folks were happy. Our festival is such a great event for inspiration, learning and making new friends and connections.

I took a few photos as I always do. This year I was focused on some of the textures around me. I am sharing some of those below. Thank you to all who visited our booth in the WEST SYSTEM tent. Thank you again to WEST SYSTEM and to the WOODEN BOAT FOUNDATION and NW MARITIME CENTER for another amazing event. AEB 😉

This September we had the opportunity to play with an EP Carry electric motor for the first time.  Dinghy owners often ask about an outboard for the PT 11.
Our preference is to discourage outboards on our dinghies because good rowing and sailing boats never make great motor boats. But some people really want to be able to use an outboard. That's understandable, but the fact is that the smallest gas outboard motors currently available are really too big for our boat; too much power and too heavy.

Now there is an option we can support; the EP CARRY electric "outboard". All of the  technical information about this innovative little motor can be found on the website ELECTRICPADDLE.COM. Though it is compared to a 1HP on their website, it has sufficient power to get the PT 11 up to a cruising speed of about 4 knots. The USCG however, considers all small electric outboards as "2HP". Based on that formula, the PT 11 and PT Spear are rated for "2HP" so, the EP CARRY aligns with the Coast Guard figures.  The amazing thing about this motor is that it weighs only 14.4 Lbs. This makes it very easy to mount and remove. The battery pack weighs 6.3 Lbs, making the total package less than 21 Lbs. There are several design features that add to the ease of handling as well. ptwatercraft.com
(At this years wooden boat festival, Russell showed up with the motor in his bicycle bag.)

Our recent experience with the EP Carry was very positive and to my surprise, I caught Russell grinning after speeding off to visit other boats in the anchorage. "Mr. anti-outboard" was actually having fun and we enjoyed it further by taking a friend on an evening "cocktail" tour of Reid Harbor, a deep bay with lots of shoreline and  many boats to observe.
We spent a couple of days, driving along the shore of Sucia in the San Juans,  in Shallow Bay making watery doughnuts, backing up, going forward, generally goofing off, and then venturing out to 'Danger Reef' to "brave" close proximity to a group of Stellar Sea Lions. We were pleasantly surprised by how far the battery went on one charge. You will notice in our video that we carried our oars with us but we did not need to employ them. ptwatercraft.com
This motor is not silent. Neither is it loud. Our lightly built plywood boat seemed to acoustically amplify the sound a little. Even so, there was no need to raise our voices for conversation. In fact, we could almost whisper and still communicate. This was a plus to me. Loud outboards in quiet anchorages are, in my mind, a real nuisance and many of us are familiar with boaters talking in their loud dinghies barely hearing each other and assuming no one else can hear them either...but of course we hear every word. Sound is a funny thing. With the EP Carry, the birds, seals, and sea lions were undisturbed by our passage. It made it a great modus for exploring the nature around us.ptwatercraft.com/ashlyn E Brown
Another thing that is really attractive to us about this motor, is that even with our limited house battery power, we could re-charge the EP Carry Battery. It does require a 150-200W inverter, but this lithium battery requires a third of the power than comparable models to recharge. At home, it is simple to plug it into a normal outlet. Beyond charging the battery and rinsing the unit after use in salt water, there is virtually no maintenance. Yet another plus.
(see our video exploring Sucia with the EP CARRY)
When our EP Carry arrived at the door, unpacking it was quite amazing. The care taken to pack it and the detailed contents made for a well thought out and complete package. It was a positive reflection of Joe and Linda who have spent  years perfecting their product. They, like us, had a vision that they worked and reworked in every detail. In fact, the original mount did not fit the PT 11 and now it does.  Further, the EP Carry, designed right here in WA State, is assembled in the USA. It is yet another example of admirable American ingenuity with style and a small business making a positive difference in the world. Of all the outboards on the market, we feel confident that the EP Carry is a good fit for the PT 11.

USER MANUAL PDF
ptwatercraft.com

PTWatercraft.com Ashlyn E Brown

 

Just because I could, (and the opportunity to learn something new came up), I have made a limited supply of unique sterling silver pendants that feature the PT Swift silhouette that is our logo. Each one is different in design and with its own serendipitous imperfections. If you think this might make a nice appreciation gift for your partner, your can order them HERE. There are only eight (8) all together!

I will ship First Class with tracking and I will include a leather or hemp cord, or for a little more, a 1mm, 16", silver ball chain. In order to price them easily, I can only ship within the USA. (The rope chain pictured is not available)

ptwatercraft.com

 

ptwatercraft.com DSC_0466 DSC_0468 DSC_0471 DSC_0475 DSC_0476Plus, don't forget we have some really special books, - for children, "Sailor Sai on the Big Blue" , land boating on the beautiful horse drawn "Toti Bleu", racing history with "Project Cheers", How to books for epoxy and painting and more!

 

Book sales proceeds from Sailor Sai, Toti Bleu, and Project Cheers, benefit three special women and  their projects. Pendant proceeds just might pay for another batch of silver clay and more pendants for next year.

Another wonderful and creative person in my family has a sale running on her amazing accessories. Fun and beautiful, these already under priced gems may not be available again for a while. FEELGOODGEMS by Dana Ecelberger

Thank you! AEB 😉

We now have a pattern for the PT 11/Spear cover. This option allows owners to pay their local canvas shop for time and materials to stitch it up but not for the time to measure and make a new pattern. Owners may also have the skills to stitch their own. The cover is for the PT 11 assembled to its full length or the PT Spear.

These photos show the first prototype cover that now belongs to PT Spear Hull #10. I regret not getting better photos with the poles installed to peak the center line but you can see one sent by a customer at the bottom of this post..

The pattern can be ordered here on our website. It gets shipped US MAIL rolled in a tube. The roll is 36" x 12 ft. long and includes general instructions.

ptwatercraft.comptwatercraft.com

ptwatercraft.com
Bow detail
ptwatercraft.com
Shown here with 18" dowels installed to raise the center line to shed water.