As previously mentioned, 2020-21 was largely spent reviewing our production process. Another redesign included the PT 11 foils kit. We took our ideas to Paul Bieker of Bieker Boats for his expertise with foil design. The new foils are thinner, using 18mm Birch plywood instead of 24mm Okoume. The Birch plywood is more dense, chosen for its strength at this thickness and not for it's looks.  The machined birch plywood is not as handsome for clear coating as the Okoume but we are quite pleased with the overall change.

Modifying the foils kits affected many other parts of the kit, so those changes are are reflected in a total rewrite of the foils manual and changes in the boat itself (the daggerboard trunk is narrower, etc).

Machining the daggerboard and rudder from high-grade plywood is a good way to produce very efficient  and relatively light foils. The process is far from easy though. It has taken much trial and error and a very good CNC programmer (Turn Point Design) to come up with the final product. The price of this foils kit reflects quite a lot of machine time for each set.

Left, the Okoume daggerboard blank. Right, the Birch Daggerboard blank
Left, the Okoume daggerboard blank. Right, the Birch Daggerboard blank
PT 11 Rudder before AfterDSC_9001
Rudder blanks using Okoume on the left and Birch on the right.
Fore-shortened image showing the NACA foil shape with lines of tape.
Fore-shortened image showing the NACA foil shape with lines of tape.
PT 11 foils 2022, finished with Interlux Perfection.
PT 11 foils 2022. Painted foils look good!
Demonstrating the in-use position of the daggerboard using the trunk cap turndog over the fiberglass pin as a "hold-down" .
The new daggerboard hold down uses the existing trunk cap turn-dog and a composite "pin" that is bonded into the dagerboard.
The complete 2021 PT 11 foils kit as sold by Chesapeake Light Craft.
The complete 2022 PT 11 foils kit as sold by Chesapeake Light Craft.