Sometimes things look right until you try to match the parts. For example, we check puzzle joints on every kit before shipping. However, it is easy to assume that a really simple little part is right. This is what happened recently when a customer in Australia wrote saying, after everything else being so perfect in the kit, the mismatch of this one little part, the inwale doubler, had to be a mistake. Well, he was absolutely right and we really do not know how many kits went out with this little part that does not fit correctly. I can only imagine that quite a few of these kits went out and quite a few builders just dealt with it quietly.
How did this happen? We used to cut this little doubler on the router table with the nesting notch that matches the notch in the transom inwale. Then we started having it CNC cut. I guess we never really checked.
So, we now have a stack of correctly cut inwale doublers. If you are not yet at this point of your build, please contact us to get the new piece. If you had to adjust or re-cut this little piece, please accept our apologies.
If you have a part that looks wrong or does not fit, we count on you letting us know. Thank you for choosing a PT 11 nesting dinghy kit!