Leo, of Sampson Boat Co / Tally Ho rebuild project, has featured the PT 11 prominently in one of his excellently produced videos. We are a little floored by the feature and yes, very grateful. He surely would not have made such a great video (we think all of his videos are great) if he wasn’t happy with his PT 11 and that makes us happy indeed. Thank you Leo!

PT Watercraft maintains an informational website about the PT 11 and the PT Spear and we are available to answer inquiries. Kit orders and kit production is now managed by Chesapeake Light Craft. We still sell our books, various small parts, and serve our pre-CLC customers directly. Sailing Rig production remains in our workshop in Port Townsend.

Leo’s video also shows how one person can manage the dinghy from vehicle to beach launch. This is something we got asked about a lot but never managed to film so this is an important addition to the PT 11 videos already online. In case you have not already seen it, click on the image below.

If you are unaware of the Tally Ho videos, we recommend you start from the beginning and subscribe. Leo is a brilliant videographer. This skill greatly compliments his knack for explaining the processes of rebuilding this historic sailboat. Even more valuable in my opinion, is that he is documenting the evolution of learning things as you go that influence how such a project evolves, while showcasing the many skills, tools, materials, and talented people it takes along the way. The videos are  educational, entertaining, and very inspiring.   AEB 😉

As previously mentioned, 2020-21 was largely spent reviewing our production process. Another redesign included the PT 11 foils kit. We took our ideas to Paul Bieker of Bieker Boats for his expertise with foil design. The new foils are thinner, using 18mm Birch plywood instead of 24mm Okoume. The Birch plywood is more dense, chosen for its strength at this thickness and not for it’s looks.  The machined birch plywood is not as handsome for clear coating as the Okoume but we are quite pleased with the overall change.

Modifying the foils kits affected many other parts of the kit, so those changes are are reflected in a total rewrite of the foils manual and changes in the boat itself (the daggerboard trunk is narrower, etc).

Machining the daggerboard and rudder from high-grade plywood is a good way to produce very efficient  and relatively light foils. The process is far from easy though. It has taken much trial and error and a very good CNC programmer (Turn Point Design) to come up with the final product. The price of this foils kit reflects quite a lot of machine time for each set.

The PT 11 sailing rig is one of our creations that we are quite proud of. The carbon tubes are engineered specifically for this rig and manufactured in Washington at Innovative Composites Engineering. It is fun for us to imagine our tubes along side Space-X & NASA tubes, and among top name windsurfer and paddle boarding tubes. Mostly we are proud that this quick-to-set-up rig, with sail and all hardware & rigging, weighs a scant 10.5 LBS.

Our boom attaches to the mast with a custom gooseneck. For years we have made these goosenecks out of vacuum bagged carbon & epoxy in a multi step process that included a lot of carbon dust, finishing, tapping, assembling, and hand stitching tubular webbing onto the forks for a soft contact point on the mast. After hundreds of these, there just had to be a  better way.

In 2021, as we sought to offset increasing costs in general and reduce labor where we could, one of the things we did was redesign our gooseneck. After years of trying to think of a better way, Russell began sketching out a new design based on using 1/2″ Delrin plate and CNC router technology.

The resulting gooseneck is clean, practical, stronger, and most importantly, much less labor to finish and install. The new goosenecks are installed by pouring epoxy around them. A tight fitting foam plug traps the epoxy. Speaking of tight fitting foam plugs; there are 7 plugs in the 3 tubes that these rigs are made from, 5 of them custom made of different sizes from dense rigid foam. Why? To keep them from filling with water and sinking of course. Why do we need 7 plugs to plug both ends of 3 tubes? The seventh plug is a secret. 😉

PT 11 sailing rigs are still produced by Russell and drop-shipped from Port Townsend. They can be purchased through Chesapeake Light Craft. Customers who purchased their PT 11 kits from PT Watercraft pre-2021 should contact us directly regarding PT 11 options. We have experienced periodic delays so lead times vary.

Happy Sailing! …AEB 😉