MARCH 29th, 2010
Weighing in lighter than expected at 340LBS.
MARCH 08, 2010
Following are pictures of the hull glassed and the final gloss coat finished. We are ready to paint the hull this week.
FEBRUARY 18, 2010
A bunch of good friends showed up to turn the skiff over. Thank you!
February 14th, 2010
Happy Valentines Day World.
Progress as of today.. All inside structure and finish work is complete. We are ready to turn the boat over and glass the bottom.
PT Skiff prototype 2 Feb. 13, 2010 
PT Skiff prototype 2 - Inside structure and finish work complete
January 25th, 2010!
I know! I know! I am getting slack with blog posting! Well, dang… It is not like there hasn’t been a whole lot happening!
Today I am posting a shot of the CNC cutting that happened on the 15th and a couple of shots of the recent final coating of the inside of the PT SKIFF. We have decided to keep it clear coated as this boat is our showpiece and people have really loved the clear finish. Further, the construction techniques are clearly visible and it helps people get a good picture of how the boat went together. So here goes…
Paste this YouTube link into your address bar to see a brief clip of the coating.. http://www.youtube.com/watch?v=nGyaVfV-yeo
JANUARY 1st, 2010!
Happy 2010 to all! We are back online again …
All 3 seat tops ready for final installation. Almost all surfaces have been glassed and are ready for the final gloss coat of epoxy.
Cheers for now…AE
DECEMBER 28th, 2009
HOPE EVERYONE HAS ENJOYED THIS LAST WEEK! I know we have not updated recently but that does not mean progress has not been made between entertaining friends and family and being entertained. We will be uploading new photos shortly of the console and drivers seat in and the forward floor in and more. Wishing all a HAPPY NEW YEAR and may 2010 be a positive year for you!
DECEMBER 20, 2009
DECEMBER 8, 2009
This past week we finished glassing the chines and have been making the patterns for, and cutting the lumber parts for this boat and at least 5 more kits. Pictured below are the glue-cleats placed near their positions.
DECEMBER 2nd, 2009
Filleting and taping the chines..
NOVEMBER 24th
NOVEMBER 23
New pictures and more to come.
NOVEMBER 16th,
Progress is being made! The next set of pictures shows aligning the stem, topside panels and sheer clamps, transom inwhales and side decks prep.
Updates are happening weekly so please keep checking. We could easily be twice as far but the manual is specific and comprehensive and all will no doubt agree, worth the time taken to create it. Cheers..AE
November 10th
Over the last couple of weeks, we have made a lot of progress even though we are working on the builder’s manual more than the boat.
Pre-finishing parts is a large part of the job in the beginning of building this boat. This stage goes really fast on the bench and means very little finish work later.
The assembly goes really quickly thanks to the tongues and slots. Here are some pictures of where we are to date and we will post more in the next few days.
November 1st.
Pre-finishing parts is done and the cradles are ready. This first week of November will see the skiff get wired together.We have been able to refine much of the building technique with this skiff so that the manual reads better and your building experience will be easier.
Pre-finishing is the first part of building the PT Skiff.
Building has begun. See here all the ply parts cut.
